12.Click the Wireless Networks tab. (If you don’t see this tab, you may need to enable your wireless card or adapter by clicking Configure to access the device settings; then follow any instructions on the screen to enable the device.)

You see a screen like this:

13.Verify that you’ve enabled your computer’s connection to the

access point. It should be listed with the small icon next to it, indicating a connection.

If it’s not listed, click Configure and type the name of your access point.

14.When you’re done making settings, click OK to close the dialog box.

Now you’re ready to connect to the projector. See “Projecting Over a Network” on page 90.

Preparing the Projector to Present Through a Network 75