Epson G5200WNL Switching Between Picture Sources, 52Presenting With the Remote Control, On the remote control, you can press one of the

note

If a button is pressed longer than 30 seconds, the remote control stops operating to conserve battery power. When you release the button, normal operation resumes.

Using the Remote Control

Make sure batteries are installed as described on page 130. Follow these tips for using the remote control:

■Point the remote control at the front of the projector or at the screen.■Stand within 49 feet (15 meters) of the projector.

note

Using the remote under bright fluorescent lamps or in direct sunlight may affect projector response.

Controlling the Picture and Sound

You can use the remote control to preview and select your picture sources, temporarily turn off the picture and sound, freeze the action, zoom in on the picture, and adjust the volume.

Switching Between Picture Sources

If your projector is connected to more than one computer and/or video source, you can switch between the different sources:

■The easiest way to select your source is to press the Search button on the remote control (or the Source Search button on the projector) repeatedly until you see the image you want on the screen.

■On the remote control, you can press one of the Source buttons to select the connected device you need.

After you select a source, the screen goes dark for a moment before the image appears.

52Presenting With the Remote Control