1-8 Setting Up the Scanner
R4C345
Rev. C
A5 size CHAP1.FM
10/7/99 Pass 0
LProof Sign-off:
<tantoname> SEI K.Ito M.Fujimori
<leadername> M.Fujimori
<editorname> SEI G.Hildebrand
Installing a SCSI Interface Board
Unless your PC already has a SCSI board installed, you will need
to install the SCSI board which comes wi th the scanner along with
a SCSI driver software before installing the scanner driver and
software applications.
If you already have a SCSI board installed in your PC, go to the
next section.
Note:
For additional information, refer to the installation guide that comes
with the SCSI board.
1. Turn off the computer and any peripheral devices. Unplug
any power cords, then disconnec t all cables from the back
panel of your computer.
2. Remove the cover from your computer.
wCaution:
Static electricity can damage electronic components.
Discharge static electricity by touching the metal frame of
your computer before handling the interface boar d or any of
the computer’s circuit boards.
3. Insert the interface board into an appropriate ex pansi on sl ot,
then secure it with the retaining scre w .
4. Replace the computer cover and reconnect all cables.