Using the System Diagnostics Program
When you start the System diagnostics, the computer checks:
•The setting of the monitor switch (for monochrome or color)
•The positions of the internal jumpers
•The peripheral devices that are connected to the system.
After these items are checked, you see a list of the devices available for testing. This list includes only the devices that are installed in the system. The list looks something like this:
The following devices have been installed
DEVICE LIST
1- System board
2- Memory
3- Keyboard
5- Color graphics adapter and CRT
6- Floppy disk drives and controller
9 - Parallel port (printer interface)
11 - Serial port
14-
17 - Hard disk drives and controller
Is the DEVICE LIST correct (Y/N)?
If the list correctly describes your system, press Y and then Enter. If a device is missing from this list, or if you wish to change the list, press N and Enter.
Note: Once you confirm the DEVICE LIST, you can only test those items. If you decide later that you need to add another device, you must return to the main menu and
Diagnostics |