Type the number of the item you wish to add and press Enter. You can add as many devices as necessary. When the DEVICE LIST is complete, press 0 followed by Enter.

Note: Even if you have both monochrome and color monitor video cards installed, you can only test the monitor that is currently selected. You select the monitor either with the monitor switch on the front panel or a DIP switch inside the main unit.

To remove a device from the list, press 2 and Enter. The screen displays the current DEVICE LIST and the prompt:

Enter the number of the item to delete:

Type the number of the item you wish to delete and press Enter. You can delete as many devices as necessary.

When the DEVICE LIST is correct, press 0 and then Enter. The screen displays the modified DEVICE LIST for a final check. If the list is correct, press Y and Enter.

You are now ready to select a test.

Selecting a test

From the DEVICE LIST, select the device you wish to test. Type the number of the device, then press Enter.

Before the test begins, you are asked how many times to perform the test. You see this menu:

Number of times to test device

1- Run test one time

2- Run test multiple times

0 - Exit

Enter selection number:

You can specify that the test be performed one time only or any number of times in the range from 1 to 9999. Running a test multiple times is for

4-4

Diagnostics