The OPERATION MENU

After the power-on self test completes successfully, the diagnostics programs start. Depending on the exact system you purchased, these programs and certain screen displays may vary. A typical OPERATION MENU looks like this:

OPERATION MENU

1 - Setup

2 - Format hard disk

3 - Format diskette

4 - System diagnostics

5- Prepare hard disk for moving

0 - Exit to DOS for more utilities

Enter selection number:

To select one of the diagnostics programs, press a number from 1 to 5 and press Enter.

Option 3, Format diskette, is included on the OPERATlON MENU for convenience only. This option lets you format diskettes for use by the System diagnostics tests without exiting from the diagnostics programs.

To use the other utility programs on the reference diskette, select 0 from the OPERATION MENU. Then start the utility from the MS-DOS prompt.

Option 0 exits the diagnostics programs in one of the following ways:

•If you have not run a diagnostics program, you see this selection on the

OPERATION MENU:

0 - Exit to DOS for more utilities

In this case, when you press 9 and Enter, you see the MS-DOS prompt.

Diagnostics

Intro-3