Appendix A

Jumper Settings

This appendix describes how to set the jumpers inside the Equity II+ if you install optional devices that require different jumper settings in the main unit. It is best if your dealer installs the option and makes all the necessary adjustments when you buy it. If you decide to do it yourself, be very careful when you follow the procedures in this appendix. There are many system components that can be damaged accidentally

The Equity II+ jumpers you may need to change are on the:

•Main circuit board

•Memory card

•Multifunction card (parallel port, serial port, and floppy disk controller). Figure A-l shows where each of these cards is located in the computer.

/

 

\

Multi-function

card

Memory card

 

Main circuit board

Figure A-1. Location of cards

User’s Guide

A-1