Run all above checks
To run all the tests on the menu in sequence, press 11 and Enter.
When you choose this option, all checks for the color adapter and CRT are performed automatically in sequential order. Although you do not start each test, you must still supply the appropriate responses to progress from one test to the next.
Floppy Disk Drives and Controller Check
Use this option to test the performance of the floppy disk drives installed in your computer. This test includes several checks that allow you to identify particular problems related to your floppy disk drives.
Before running these tests, format a floppy disk to use for the tests that write data on the disk in the drive. To test a 1.2MB drive, you can use a 1.2MB or a 360KB floppy disk. However, to test the full capacity of the drive, use only a 1.2MB disk. In a 360KB drive, you can only use a 360KB floppy disk.
Note: The Format diskette option on the OPERATION MENU always formats diskettes in 360KB format, regardless of the type of drive. Therefore, to test a 1.2MB drive, use the
You can select the individual tests from this menu:
FLOPPY DISK DRIVE(S) AND CONTROLLER CHECK MENU
1 - Sequential seek check
-Random seek check
:- Write, read check
4 - Speed check
5 - Disk change check
6 - Run all above checks
0 - Exit
Enter selection number:
Diagnostics |