Note: If memory on an option board overlaps the computer’s main memory, you must disable that part of memory-either on the option board or on the built-in memory board. To reduce the amount of main memory, you must use the Main option (of this program) and also change a jumper on the built-in memory board. You can find instructions for changing the jumper settings in your User’s Guide.

To change the amount of memory, follow these steps:

1.On the main menu, press 1 to move the cursor block to Memory and press Enter. This menu appears on the screen:

0 KB Expansion ** SAVE SETTINGS **

2.Press 1 and t to move the cursor block to the setting you want to change: Main or Expansion.

3.When the cursor block is on the Main option, this message appears at the bottom of the screen:

‘T return to main menu, 1 select option, Enter change main memory size

Press Enter to change between the possible amounts of main memory. You can set the amount of main memory to 256KB, 512KB, or 640KB.

4.When the cursor block is on the Expansion option, this message appears at the bottom of the screen:

tl s e l e c t o p t i o n , + o r - c h a n g e e x p a n s i o n memory size

Press + to increase or press - to decrease the amount of expansion memory. You can set the amount of expansion memory in increments of 64KB within the range from 0 to 15,360KB.

5.When your memory settings are correct, move the cursor block to

**SAVE SETTINGS **. You see this prompt:

t s e l e c t o p t i o n , Enter set memory size

Press Enter to set the new memory size and return to the main menu.

Diagnostics

1-3