Epson IP-100 manual 60

3.Press the Menus buttons until the cursor moves to Set No. next to Copies on the display.

4.Press the Change Settings buttons to change the setting for the selected item. For details about the settings, see the table below.

				3
No.	Item	Set No.	Setting
1	Trimming	0	Trims the photo image to fit in
			the print area of the paper.
		1	Reduces the photo image to fit
			in the print area without
			trimming.
	Note:
	If the horizontal to vertical ratio of the photo size exceeds
	2 : 1, the printer prints it with no trimming, regardless of the
	Trimming setting.
2	Index	0	Prints the index with printing
	date and		date and time.
	time
		1	Prints the index without printing
			date and time.
3	Print start	-5 to 5	Adjusts the vertical print start
	position,		position in 0.5 mm increments:
	vertical		max. 2.5 mm. Select negative
			values to move the position up
			or positive values to move it
			down.
			This setting is valid only for A4
			and stickers.
4	Print start	-5 to 5	Adjusts the horizontal print start
	position,		position in 0.5 mm increments:
	horizontal		max. 2.5 mm. Select negative
			values to move the position left
			or positive values to move it
			right.
			This setting is valid only for A4
			and stickers (EPSON Photo
			Stickers 16).

Printing Photo Directly with PC Cards 3-23