Epson IP-100 6-4 Troubleshooting

Display	Error	Action
indication
	Printer internal	Turn the printer off. After a
	adjustments.	few seconds, turn it on again.
		If the error is not cleared,
		contact your dealer.
	System error.	Turn the printer off. After a
		few seconds, turn it on again.
		If the error is not cleared,
		contact your dealer.
	The Input switch is	Turn the printer off and set the
	not properly set.	Input switch to the INT side.
		Turn the printer on and try
		printing a photograph.
	The black ink	Install a cartridge or replace
	cartridge is not	the old one with a new one
	installed or it is	(S020093).
	empty.	See “Replacing Ink
		Cartridges” on page 5-2.
	The color ink	Install a cartridge or replace
	cartridge is not	the old one with a new one
	installed or it is	(S020110).
	empty.	See “Replacing Ink
		Cartridges” on page 5-2.
	Paper has	Open the printer cover and
	jammed inside	remove the jammed paper.
	the printer or it is	Load the paper properly in
	not loaded.	the sheet feeder and press
		the E Load/Eject button.
	Paper has	Open the printer cover and
	jammed inside	remove the jammed paper.
	the printer.
	The ink cartridge	Check the ink cartridge and
	is not installed	install it properly.
	properly.	See “Replacing Ink
		Cartridges” on page 5-2.

6-4Troubleshooting