Note:

❏The selected Frame No. is retained until the printer is turned off.

❏If you press any buttons other than the Change Settings buttons while selecting the Frame No., the current number becomes valid and the printer turns on the Frame mode.

3.Press the Frame button again.

The Frame light turns on to indicate the Frame mode is on.

Note:

❏Type, Size, and Layout are automatically changed to the Sticker mode.

❏If you press the Cancel button, the Frame mode is turned off with the Frame No. being retained.

4.Eject the optional PC card you inserted in step 1 from the printer’s card slot and load the PC card with the stored photograph.

5.Load A6 size paper divided into 16 small stickers.

6.Select the photo No. you want to print with the selected frames and print it.

Note:

If photos are not printed within the stickers, adjust the print start position. For detailes, see “Changing the Internal Settings” on page 3-22.

4-6Using Filters and Frames