c❏ Never use alcohols or thinners to clean the printer; these chemicals can damage the components as well as the case.

❏Be careful not to get water on the printer mechanism or electronic components.❏Do not use a hard or abrasive brush.❏Do not spray the inside of the printer with lubricants;

unsuitable oils can damage the mechanism. Contact your dealer or a qualified service person if lubrication is needed.Caution:

Transporting the Printer

5

 

If you need to transport your printer some distance, carefully repack it using the original box and packing materials as follows:

1.Open the printer cover and make sure that the print head is in the home (far right) position. If not, turn on the printer and wait until the print head returns to the home position. Turn off the printer and then close the printer cover.

cLeave the ink cartridges installed when you transport the printer. Removing the cartridges during transport can damage the printer.

2.Unplug the power cord from the electrical outlet; then disconnect the interface cable from the printer.

3.Remove the paper from the sheet feeder and remove the paper support.4.Push in the output extension tray, and then raise the output tray.5.Attach the protective materials to the printer.Caution:

Maintenance and Transportation 5-13