11. Slide the left and right edge guides to the center of the paper
exit path. This helps prevent paper jams.
12. Turn on the printer. W h en the printer receives data, it
automatically loads the paper before printing.
Note:
❏Always close the printer cover before printing. The printer stops
printing when the cover is open.
❏You can also advance the paper to the loading position by
pressing the Load/Eject button.
❏As you print, make sure the paper advances behind the printer
guide as shown below. Also, make sure the paper path guide rests
against the paper guide.
cCaution:
Do not use the knob on the right side of the printer except to clear
paper jams when the printer is turned off. Otherwise, you may
damage the printer or cause it to lose the top-of-form position.
Loading paper with the pull tractor
Note:
❏When you use this paper feed path, you must first purchase the
optional tractor unit.
❏The standard rear push tractor cannot be removed.
To load continuous paper with the pull tractor, see the following.
2-25
L
Sunflower-P
Rev.c
A5 size Chapter 2
01/19/96 pass 2
2-24 Paper Handling