Using Q uiet M ode
The Quiet mode allows you to print with less noise, however
printing speed is reduced.
To enter Quiet mode, hold down the Font and Condensed
buttons while turning on the printer.
You can only set this mode when you turn on the printer. You
cannot set this in the Default Setting mode. When you turn off the
printer, Quiet mode is canceled. Each time you wa nt to use this
mode, you must turn the printer on as described in this section.
Using Micro Adjust
The Micro Adjust feature allows you to move paper forward or
backward in 1/360-inch increments. You can use this feature to
adjust the loading and tear-off positions.
This section explains how to use Micro Adjust. S ee the next section
for information on adjusting the tear-off position .
The loading position is the position of the paper after it has been
automatically loaded by the printer. If your printing appears too
high or low on the page, you can change the loading position with
the Micro Adjust feature as follows:
1. Make sure the printer is turned on. If necessary, li ft up the
printer cover so you can see the paper position.
2. Load either continuous or single-sheet paper. (Load continuous
paper by pressing the Load/Eject button.)
3. Hold down the Pause button for three seconds. The Pause
light starts flashing.
R
Sunflow er-P
Rev.c A5 size Chapter 3
01/09/96 pass 2
Using the Printer 3-13