4.Tear off the printed pages.

5.Press the Pause button to turn off micro-adjust mode.

When you resume printing, the printer automatically feeds the paper back to the top-of-form position and begins printing. Your tear-off position setting remains in effect until you change it, even if you turn off the printer.

Adjusting the printing position

The printing position is the position on the page where the print head actually prints during a print job. You can change the current vertical printing position temporarily by using the micro-adjust feature as described in the steps below.

Note:

Your printing position setting is in effect only until the next time you load paper or turn off the printer.

1.Make sure that the printer is not printing. If it is, press the Pause button to stop printing.

2.Hold down the Pause button for about three seconds. The Pause light begins flashing and the printer enters the micro- adjust mode.

3.If necessary, open the printer cover to check the printing position, and press the LF/FF [D] button to feed paper forward or the Load/Eject [U] button to feed paper backward.

4.When your paper is positioned correctly, press the Pause button to turn off micro-adjust mode and resume printing.

2-32Paper Handling