1.Make sure paper is loaded and the printer is turned off.

c Caution:

Whenever you turn off the printer, wait at least five seconds before turning it back on; otherwise you may damage the printer.

2.While holding down the Font button, turn on the printer. The printer enters the default-setting mode and prints the language selection instructions.

3.Press the Font button until the Font lights indicate the language you want, as described in the language selection instructions.

4.Press the Tear Off/Bin button (LQ-680) or Tear Off/Special Paper button (LQ-680Pro) to print the default-setting mode instructions (four pages) in the language you selected.

The printed instructions list the default settings you can change, describe how to change them, and show you how the control panel lights help you make settings. Follow these instructions to change the default settings using the buttons on the printer’s control panel.

Note:

The arrows on the instruction sheets indicate the printer’s current settings.

5.When you finish making settings, turn off the printer and exit the default-setting mode. Any settings you have made remain in effect until you change them again.

Note:

To exit the default-setting mode, turn off the printer when it has finished printing.

4-10Changing Printer Settings From the Printer’s Control Panel