1.

Make sure the printer is turned on. If necessary, lift up the

 

 

printer cover so you can see the paper position.

 

2.

Load either continuous or single-sheet paper. (Press the

 

 

 

Load/Eject button to load continuous paper from the tractor

2

 

or a single sheet from the optional cut-sheet feeder.)

 

 

 

3.Hold down the Pause button for about three seconds. The Pause light starts flashing and the printer enters the micro- adjust mode.

4.Press the LF/FF [D] button to move the paper toward the front of the printer, or press the Load/Eject [U] button to move the paper toward the rear. The new loading position is set to the position where you release the buttons.

Paper Handling 2-29