Responding to TV Panel Light Indicators
|
|
|
| Lamp |
|
|
|
|
| Power | |||||||
|
|
|
| light |
|
|
|
|
| light | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lamp and Power light status
Lamp light | Power light | Status |
Off | Green | Ready |
|
| The TV is operating normally. |
|
|
|
Off | Green flashing | |
|
| After a moment, your image will appear. |
|
|
|
Off | Orange flashing | |
|
| Wait until the Power light stops flashing. When it lights orange |
|
| without flashing, you can turn the TV back on or unplug it. |
|
|
|
Off | Orange | Standby mode |
|
| To turn the TV back on, press the Power button. If you need to |
|
| disconnect the power, you can unplug the TV. |
|
|
|
Orange flashing | Any state | Lamp replacement warning |
|
| The projection lamp is almost burned out. You may also see a |
|
| message on the screen. |
|
| Obtain a replacement lamp, then follow the steps on page 97 |
|
| to replace it. |
|
|
|
Red | Red | Lamp error |
|
| The projection lamp has burned out or has another problem. |
|
| Obtain a replacement lamp, then follow the steps on page 97 |
|
| to replace it. |
|
|
|
Red flashing | Red | Lamp cooling or open cover error |
|
| Make sure the lamp cover is closed completely. |
|
| If the cover is closed, the lamp may not have cooled |
|
| completely before the cover was opened. Wait a few minutes |
|
| until the fan stops running, then unplug the TV, plug it back in, |
|
| and press the Power button to turn on the TV. If the error |
|
| persists, contact Epson as described on page 121. |
|
|
|
Orange | Red | High temperature warning |
|
| The TV is overheating and the lamp is turned off automatically. |
|
| Turn off the TV and let it cool for a few minutes. Make sure there |
|
| is plenty of space around the TV and that none of the |
|
| ventilation slots are obstructed. Then turn the TV back on. If it |
|
| continues to overheat, contact Epson as described on |
|
| |
|
|
|