Light Equipment switch
Power TV STB1 STB2 VCR DVD
REC | PAUSE | SKIP |
| |
STOP | REW PLAY | FF | ||
Photo View Freeze | ||||
Menu |
| Exit | ||
Photo |
| Select |
|
|
|
|
|
| |
Zoom |
|
|
|
|
| Prev. | Enter | Next | Rotate |
|
|
|
| |
Select
1 2 3
4 5 6
7 8 9
Ch
0 Enter
TV/Video Mute Favorite
Vol. Ch
Aspect POP Swap Sleep
MTS Guide Ch Prev. Ch Display
Info
TV Reception or Operation Problems
Problem | Solution |
TV reception is poor. | Check your antenna, cable, or digital or satellite receiver |
| connections. See page 16 for details. |
| Weather conditions and interference from other nearby |
| equipment may be affecting the picture quality. Turn off or |
| relocate equipment such as hair dryers or microwave ovens, if |
| possible. |
|
|
The TV channels can’t be | When the TV is warming up or cooling down (the Power light is |
changed or selected. | flashing), you can’t use the buttons. When the Power light stays |
| lit green or orange, the buttons are operable. |
| You may have locked access to certain channels. Press the |
| Menu button on the TV panel or remote control. Check the |
| Channel Lock settings on the Lock menu as described on |
| |
| You may have marked the channel to be skipped. Press the |
| Menu button on the TV panel or remote control. Check the |
| Manual Program settings on the Channel menu as described |
| on page 49. |
| If your cable system added channels and you can’t receive |
| them, you need to run the Auto Program utility to add them to |
| your TV’s list of receivable channels. Press the Menu button on |
| the TV panel or remote control. Select the Auto Program setting |
| on the Channel menu as described on page 47. |
|
|
You can’t receive a digital | You must connect the TV to a digital TV receiver to receive digital |
broadcast. | broadcasts. |
|
|
Remote Control Problems
ProblemSolution
The remote control doesn’t work. If you have problems with the remote control, press any button on the remote to check if the light on the top comes on.
If the light comes on, move closer to the TV when you use the remote control and aim it at a more direct angle. Make sure the room lighting is not too bright and not shining directly on the remote control or the TV receiver window. Also clean the transmitter area on the top of the remote and the receiver window on the TV to see if that helps.
If the light doesn’t come on, make sure the batteries are inserted correctly and are working. If necessary, replace the batteries.
Make sure the equipment switch at the top of the remote control is set to the device you’re trying to control.
If you still have problems with the remote control, try the other suggestions on page 34.