Power TV STB1 STB2 VCR DVD
REC | PAUSE | SKIP |
| |
STOP | REW PLAY | FF | ||
Photo View Freeze | ||||
Menu |
| Exit | ||
Photo |
| Select |
|
|
|
|
|
| |
Zoom |
|
|
|
|
| Prev. | Enter | Next | Rotate |
Select
1 2 3
4 5 6
7 8 9
Ch
0 Enter
TV/Video Mute Favorite
Vol. Ch
Aspect | POP | Swap Sleep | Sleep |
MTS | Guide | Ch Prev. Ch Display | button |
|
| Info |
|
Automatically Shutting Off the TV
You can set up the TV to shut off automatically in case you fall asleep or want to control how long it stays on. You can set the TV to go into “sleep” mode after 30, 60, or 90 minutes or you can set it to turn off automatically after 30 minutes if it receives no signal input.
Putting the TV Into Sleep Mode
1Press the Sleep button on the remote control. SLEEP OFF appears in the upper left corner of the screen.
2Press the Sleep button again to select one of the following options:
•SLEEP 30min
•SLEEP 60min
•SLEEP 90min
3To check how much time is left before the TV enters sleep mode, press the Sleep button. If less than 3 minutes are left, the time display remains on the screen. Press Sleep again if you want to change the sleep time or turn off sleep mode.
4After the selected time has elapsed, the TV screen goes blank and the Power light flashes orange. When the Power light stays lit orange, the TV is in sleep mode.
To turn the TV back on, press the Power button on the TV panel or remote control.
Setting Up Auto Shutdown
1Press the Menu button on the TV panel or the remote control.
2To highlight the Setting menu tab, press Next >.
3Press Enter. The Auto Aspect setting is highlighted.
4Press Select d to highlight Auto Shutdown.
5Press Prev. < or Next > to select ON.
6Press Menu to exit the menu system. If there is no signal input after 30 minutes, the TV shuts off.