Power |
| TV STB1 STB2 VCR DVD | ||
REC | PAUSE | SKIP |
| |
STOP | REW PLAY | FF | ||
Photo View Freeze | ||||
|
|
|
| |
Menu |
| Exit | ||
Photo |
| Select |
|
|
|
|
|
| |
Zoom |
|
|
|
|
| Prev. | Enter | Next | Rotate |
|
|
|
| |
Select
1 2 3
4 5 6
7 8 9
Ch
0 Enter
TV/Video Mute Favorite
Vol. Ch
Aspect POP Swap Sleep
MTS Guide Ch Prev. Ch Display
Info
2Press the Print button on the TV panel or remote control. You see the Print Settings screen:
Caution
Remove your printed photos before 10 of them have ejected from the printer so they don’t block additional photos from ejecting properly or cause a paper jam.
Don’t open the lock cover on the front of the printer while it is printing; this causes printing to stop.
Don’t remove your photo card while the printer is printing any photos from the card. Wait for all the queued print jobs to finish.
3To print one copy of the photo, press Enter.
To print multiple copies, press Prev. < or Next > until the number in the Copies box is correct. Then press Enter.
After a moment, printing starts.
During printing, the Printer light flashes. When printing is finished, the Printer light turns off.
4To print additional photos, repeat these steps. You can send multiple photos for printing at one time, up to 15 photos.
To monitor your print job or to cancel it, see the next section.
If you see a printing error message, select Yes to check for the problem. Then follow the
When you’re finished printing, remove the borders from the edges of your photo by bending them back and forth and tearing them off.