11. Tighten up the screw of the lamp lid using a screwdriver (+).

How to reset the operation time meter

Plug in the power cord, switch on the projector and re- set lamp time by pressing the , and POWER but- tons simultaneously.

Lamp cannot be removed from the projector unless setting the lamp exchanging metal.

If you do not have the lamp exchanging metal, re- move the metal from the new lamp and use it. Do not touch the lamp directly. It may be broken and may cause you to injure or burn or yourself.

Caution:

For the lamp you have removed, do not spill liquid on it, place it near flammable objects or where chil- dren can touch it. Otherwise, it will cause injury or fire.

Be sure that the projector guide is firmly inserted between the right and left lamp guides.

Do not touch the lamp directly, place a cloth over the replacement lamp.

Important:

The projector will not turn on if you do not secure the lamp lid.

The operation time meter must be reset after the lamp has been replaced.

Do not reset the operation time meter unless the lamp has been replaced.

The life of the lamp

The average life of the lamp for the projector is about 1,000 hours of consecutive use. Life span may differ according to operating environment, and may be shorter than 1000 hours. Decreases in luminescence and/or color brightness will indicate that the light source lamp is in need of replacement. When lamp operation time exceeds 1,000 hours, the indicator will flash alternately between green and red (while the lamp is in operation; when the lamp is not in operation, the indicator will appear red only). When the lamp has been used for about 1,250 hours, the message “LAMP!!.” will appear on the screen. When the lamp has been used for about 1,300 hours, the projector will automatically shut off for the safety of the lamp and the power indicator light up in red. The projector cannot be used until the lamp has been replaced.

Caution:

The light source lamp is fragile. Be careful not to cut yourself with the fragments.

The lamp life depends on the environment. For re- placement lamps, please contact your dealer.

The projector automatically shuts off when

 

the lamp is used up in about 1,300 hours

 

and not used until lamp replacement.

ENGLISH

 

41

Page 41
Image 41
Epson LVP-X200A user manual Life of the lamp, How to reset the operation time meter