Overview of the remote control
ENGLISH
operation indicator
When the operation button is pressed, this indicator blinks. It also illuminates when the projector is in the personal computer mode or drawing mode which is able to have a cursor operation. See pages 25, 38.
select
This operates in the same way as the left button on the computer mouse. By pressing this button during the drawing mode can set the start and end point of the figure. See pages 25, 38.
double click
This operates in the same way as double clicking the left button on the computer mouse. See pages 25, 38.
input source
(RGB, VIDEO, CARD)
Use to select the input source you wish to watch. If this button is pressed during PinP mode, the input signal of sub image will be changed. See page 16.
menu
Press to display MENU selection bar. Exit the menu system by pressing the MENU button during displaying MENU display. See page 18.
volume
Press to turn the volume down. See the table as shown below.
PinP
Press to turn on the PinP (Picture in Picture) image, or to cancel it. See page 26.
expand
Use to expand the image. See page 26.
card auto play
Press to start auto play function of the PC CARD. See page 28.
PC card release
Press this button to be able to eject PC card. Make sure to press this button all the time to eject the PC card. See page 27.
SELECT
DOUBLE | CANCEL | |
CLICK | ||
|
START/STOP
RGB VIDEO CARD
FOCUS
MENU/ZOOM
ENTER
/STILL
EXPAND PinP CURSOR
PC CARD | AUTO |
AUTO PLAY RELEASE POSITION
POWER
cancel
This operates in the same way as the right button on the computer mouse. If this button is pressed during drawing mode, the figure will diappear. See pages 25, 38.
start/stop
Use to turn the PC control mode or cursor operation mode on or off. See pages 25, 38.
focus / zoom
Use to change FOCUS or ZOOM mode. See page 17.
{, }, $, %
Used for MENU setting. See the table as shown below.
enter/still
Used for MENU setting. Also, use to freeze the image. See pages 18 and 25.
volume (+)
Press to turn the volume up. See the table as shown below.
cursor
Press to display the cursor. Also used to change the mode of PC control or cursor operation, when the projector is connected to a personal computer with
auto position
Use to adjust the position of Personal computer image. See page 16.
power
Use to turn the projector on or off when MAIN POWER is on. To turn the projector off, press this button twice. See page 22.
The operations of these buttons varies as follows depending on the modes selected:
| $ | % | } | { | – (VOL) | + (VOL) | |
|
|
|
|
|
|
| |
Normal | Adjust FINE | Adjust FINE(+) | Adjust FOCUS or | Adjust FOCUS or | Volume down | Volume up | |
ZOOM | ZOOM (+) | ||||||
|
| ||||||
|
|
|
|
|
|
| |
On Menu | Select the setting | Select the setting | Set the setting | Set the setting | – | – | |
item (Left) | item (Right) | item | item | ||||
|
| ||||||
|
|
| |||||
|
|
|
|
|
|
| |
On PC | Select previous | Select next | Select | Select | Select the | Select the | |
card Menu | image (Left) | image (Right) | INDEX or FILE | INDEX or FILE | group | group (+) | |
|
|
|
|
|
|
| |
PinP | Exchange the image | Exchange the image | Switch still pictures | Switch still pictures | Recapture of the | Recapture of the | |
(main or sub) | (main or sub) | (main or sub) | (main or sub) | still picture | still picture | ||
|
|
|
|
|
|
| |
EXPAND | Expand different | Expand different | Expand different | Expand different | Set the expand | Set the expand | |
area (Left) | area (Right) | area (Down) | area (Up) | rate | rate (+) | ||
|
|
|
|
|
|
|
8
