Important:
•To save battery power, turn off the operation indicator by pressing the START/STOP button when not in use.
•To save battery power, the operation indicator will turn off if the remote control is not operated for a period of 5 minutes.
Battery installation
Use two AA size batteries.
1.Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow.
2.Load the batteries making sure that they are positioned correctly (+ to +, and - to
3.Replace the back cover.
1 | 2 | 3 |
Important:
•Do not use a new battery with an old one.
•Load batteries in the correct position.
•Do not heat, take apart, or throw batteries into fire.
•Do not try to recharge batteries. Do not use rechargeable batteries.
•If the alkaline solution of alkaline batteries comes in contact with your skin or clothes, rinse with water. If the solution comes in contact with your eyes, rinse them with water and then consult your doctor.
Operation area
The range for operation is about 10m when the remote points to the projector. When using the remote control for SpacePointer, the range for operation is about 7m. The distance to the screen back to the projector must be less than 7m.
ENGLISH
20˚
15˚
20˚
15˚
30˚
30˚
20˚
20˚
Important:
Avoid the direct sunlight or fluorescent light to the remote control sensor. Also keep the distance of more than 2 m between the remote control sensor and fluorescent lamp. The remote may not work correctly.
9
