(2)Removal of protective paper for paper end detector
The MX-80 Type II is provided with a protective paper inserted between the inner and outer paper guides to protect the paper end detector from damage due to shocks or vibrations during transportation. Before using the Printer, be sure to remove this paper. If the MX-80 Type II is to be reshipped, remember to return it to the original position.
(3)Prepare tools
Prepare the following two tools to | disassemble or assemble the printer. |
(1) | Phillips type | screwdriver | 1 pc. |
(2) | Round-blade | type screwdriver | 1 pc. |
Phillips Type
Fig. 4 Assembly Tools
(4) Removal of shipping screws
The purpose of the shipping screws is to protect the MX-80 Type II against any damage that may be caused by shocks or vibrations during transportation. Therefore, before operating the MX-80 Type I I, remove the screws as described below. (See Fig. 5.)
STEP 1. Stand the printer on its left side.
STEP 2. Remove with a screwdriver, the two shipping screws visible on the underside of the lower case.