7.3. Cut paper sheet

7.3.1. Loading of cut paper sheet

The MX-80 F/T Type I I accommodates cut paper sheets measuring 8.3” to 8.5” in

width. To load a cut paper sheet, observe the following procedure.

 

 

STEP 1.

Raise the printer

lid.

 

 

 

 

STEP 2.

Unlock the release lever. (See Fig. 39.)

 

 

STEP 3.

Pull the scale toward the front of

the Printer to detach

the scale

from

 

the platen. (See

Fig. 39.)

 

 

 

 

STEP 4.

Confirm that

the

paper guide

roller

is at the center of the

sprocket

shaft.

 

If not, set it

at the center of

the shaft.

 

 

NOTE: The paper guide contributes to smooth paper feeding.

STEP 5. Insert the cut paper sheet between the paper guides at the rear part of printer mechanism.

NOTE: The paper sheet can be installed without removing the separator.

- 3 0 -