FF SW:

When this switch is depressed once, the paper

is advanced vertically

(Form Feed)

to the next Top of Form position. This switch must be depressed

 

 

while the Printer is OFF-LINE. Otherwise, the

form

feed operation

 

 

will not be carried out.

 

 

 

 

 

The Top of Form position is initialized when

the

POWER switch

 

 

is turned on or when INIT signal is applied to the interface

 

 

connector. Therefore, before turning the POWER switch on to

 

 

start operating the Printer, set the paper at the appropriate Top of

 

 

Form position.

 

 

 

LF SW:

The paper advances while this switch is being depressed.

 

(Line

Feed)

The line spacing for paper advancement is determined by ESC

A +

 

 

n code (described later). When the Power switch is

turned on,

the

 

 

line spacing is initialized at l/6 inch.

 

 

 

 

 

The line feed operation is prohibited while the Printer is actively

 

 

engaged in printing.

 

 

 

1.2.

Indicators

 

 

 

 

POWER:

Illuminates while the Printer is receiving AC power.

 

 

READY:

Illuminates when the Printer is ready to receive data.

 

PAPER OUT:

Illuminates when the paper supply is near its end.

 

 

ON

LINE:

Illuminates when the Printer is in the ON-LINE

mode.

 

- 3 7 -