5. Separator Installation

The separator of the Printer contributes to smooth paper feeding. Set the separator by inserting its edge into the two holes located at the rear part of the frame of the printer mechanism. (See Fig. 11.)

Fig. 11 Separator Installation

6.Paper Loading

6.1.Loading of fanfold paper

The MX-80 Type II Printer accommodates fanfold paper from 4” to

10” in

width.

To load the fanfold paper, observe the following procedure.

 

 

STEP 1. Raise the printer lid.

 

 

 

STEP 2.

Turn the scale toward the front of the Printer and detach it from the

 

platen.

 

 

 

STEP 3.

Confirm that the paper guide

roller is at the center of the

sprocket

shaft.

 

If not, set it at the center of

the shaft.

 

 

NOTE: The paper guide roller contributes to smooth paper feeding.

STEP 4. Raise the two paper holding covers, and be sure to insert the fanfold paper between the frame and plastic roller of the separator. (See Fig. 12.)

- 1 0 -