STEP 4. Put the ribbon between the head nose and the ribbon mask. In this case, the ribbon can be set easily by hooking it to the edge of the head nose and turning the ribbon feeding knob of the cartridge case in the direction of the arrow (i.e., counterclockwise) while depressing the ribbon with a ball-point pen. Then, tension the ribbon by turning the ribbon feeding knob counterclockwise. (See Fig. 9.)

I

Fig. 9 Cartridge Ribbon Setting

NOTES: 1. Incorrect setting of the ribbon may cause it to come off. (See Fig. 10.)

2.Confirm that the ribbon is neither twisted nor creased and that the cartridge is set properly

- 9 -