Testing the Scanning Utilities
After you have installed the Scanning Utilities, test your scanner with the utilities to make sure everything works correctly. Follow these steps:
1.Raise the scanner’s cover and place an image face down on the glass surface. Then carefully close the cover.
2.
4.Click Scan. After a few moments, you see the image in the EPSON Scan! II
If you do not see it, repeat the steps you performed to set up your scanner and install the scanning Utilities again.
5.ExitScan! II.
Note:
Before you can acquire an image from within your application the first time, you need to select EPSON TWAIN as your TWAlN data source. See your application documentation for instructions.
Installing Your Software |