The image cannot be printed on the printer, the printout is garbled, or the printout is not an image.

Check that the printer is properly connected to your Macintosh and is set up correctly; see your printer manual.

Check that your software is properly installed and set up for your printer; see your software manual.

Images cannot be scanned at all or only a few dots appear in the scanned image.

Try different EPSON TWAIN settings. Be aware that some settings disable others for a particular effect. Also, depending on your scanner, some features may not be available.

Set the Brightness, Highlight, or Gamma Correction options to darker settings and scan the image again.

If you selected Line Art as the Image Type setting and any setting other than Screen as your Destination setting, try increasing the Threshold setting to a higher value.

Moiré (interference) patterns appear in the scanned image.

Moiré patterns commonly occur when you scan images that include halftone screens. To minimize this effect, try any of the following solutions:

Move or angle the original slightly

Change the Sharpness setting

Change the Scale setting slightly

Select 3 pass for the Scanning Sequence.

Troubleshooting 6-11