See if your Macintosh has enough application memory to run your software. If you are running other software at the same time, you may not have enough memory left. See the section on memory allocation in your Macintosh manual.
The scanner does not start scanning.See that the scanner’s READY light is on.
Make sure the scanner's terminator and SCSI ID are set correctly.
After clicking the Preview icon, the image does not appear in the preview window.
Click on the TWAIN preview window.
The scan is not the full width you selected in the preview area.The EPSON
After scanning and opening several scanned images, your application software fails and your scanned image is lost.
Save and close the scanned images before scanning a new one.
The size of your image increases after scanning it into your image editing application.
Your image editing software may be converting the image tofull
Troubleshooting