Changing Language Settings
You can use the Language Setup menu to change the default language for DVDs that allow you to make this selection.
1.When a DVD is not playing, press the 
button on the remote control. You see the LANGUAGE Setup menu:
2.Press 
to highlight the setting you want, then press 
to display a list of languages.
3.Press 
to select the language you want, then press 
to save it. For a list of language code definitions, see page 67.
4.To return to the previous menu level, press 
.
Adjusting the Resume and On-Screen Guide Settings
1.When a DVD is not playing, press the 
button on the remote control.
2.Press 
to highlight 
and display the OTHERS Setup menu.
3.Press 
to highlight RESUME or ON SCREEN GUIDE, then press 
to display the ON/OFF selection box.
4.Press 
to select the setting you want, then press 
to save it.
■RESUME: This setting defines the way playback resumes after pausing. To have playback resume from the point where it was stopped, set to ON (the default). To have playback start from the beginning of the chapter, set to OFF.
■ON SCREEN GUIDE: This setting, which is ON by default, briefly displays an indicator on the screen when you pause, resume, or use other playback controls. Select OFF if you don’t want these indicators to be displayed.
5.To return to the previous menu level, press 
.
Doing More with MovieMate 41