4Connect your camera’s USB cable to your camera

and the EXT. I/F port on the back of PictureMate.

6When you are finished, disconnect your camera from PictureMate before inserting a memory card in PictureMate.

5Use your camera’s controls to select and print photos on PictureMate. (See your camera manual for instructions.)

Note: You can select default print settings that are used if the camera’s settings are not selected. Press the Menu button, select Setup, and then select Direct Print Settings.

Printing Wirelessly From a Bluetooth Device

You can print photos wirelessly from your Bluetooth-enabled PDA, cell phone, or computer when you use the optional Epson Bluetooth Photo Print Adapter. The adapter (part# C12C824383) is available from your local reseller or Epson (see page 68).

Note: While PictureMate complies with the Bluetooth specification, it is not guaranteed to work with all devices enabled with Bluetooth wireless technology. Make sure your photos meet the requirements listed on page 4.

1Make sure PictureMate is on but not printing.

Caution: Do not connect or remove the Bluetooth Photo Print Adapter while it is communicating with a device or while PictureMate is printing; this may cause PictureMate to malfunction.

43