4Slide the edge guides outward.
5Create a stack of up to 20 sheets of paper and separate the sheets slightly by fanning them.
6Place your paper into the slot between the edge guides with the glossy or whiter side up. Slide the edge guides inward slightly.
Load glossy or whiter side up
Make sure paper is beneath arrow on edge guides
Note: Load a maximum of 20 sheets at a time. Load your paper glossy or whiter side up to prevent smearing.
7Store any unused paper in the original package and keep it flat in a dry area to prevent curling.
Note: When you need more paper, order a PictureMate 200 Series Print Pack. See page 48 for more information.
Inserting Your Memory Card
1Press the 
On button to turn on PictureMate.
2Press the Open button to open the output tray, if necessary.
3Insert the memory card into the correct slot, as shown on the next page. Insert just one card at a time.
Note: PictureMate can’t read multiple cards at once.
4Push the card in carefully until it stops (it won’t go in all the way).
When the card is in, the memory card light comes on and begins to flash.
Caution: Do not remove a card while the memory card light is flashing; you may lose photos on your card.
6