note
If a projector develops a critical problem, it may not be possible for it to report the error.
Understanding the Notification Messages
If a projector experiences a problem, EMP Monitor sends an
The subject line of the message includes the projector’s display name, shown in EMP Monitor, and the warning/error.
The body of the message contains:
■The projector’s display name in EMP Monitor
■The error/warning message
The problem descriptions are similar to the errors listed on page 137.
When the problem has been fixed, EMP Monitor sends a message indicating the problem has been resolved.
Using a Browser to Monitor the Projector
If your projector is connected to a network, you can use a standard web browser to monitor and control it.
1.Make sure that the projector is set up for your wireless network, as described on page 50. (Standby Mode in the Extended menu should be set to Network On to monitor the projector in standby mode.)
2.Open your web browser and enter the IP address of the projector you want to monitor in the browser window.
If you’re not sure what the address of the projector is, turn the projector on and select Wired LAN or Wireless LAN from the Network menu to display the IP address of the projector.
142Managing Projectors