Connecting an RGB Video Source
1.Locate the VGA computer cable provided with the projector.
2.Connect the cable to the video port on your player and the Computer/Component port on the projector.
3.If you want to play sound through the projector, see page 45 for instructions on connecting audio cables.
4.If you don’t need to make any other connections, see page 17 for instructions on turning on the projector and adjusting the image. Once the projector is turned on, select the image source: press the Search button on the remote control or press the Source Search button on the projector’s control panel repeatedly until the image appears.
note
Be sure your video player is not a component video source. If you select the wrong source, image quality may suffer. Check your video player’s documentation.
Connecting to Computers, Cameras, and Other Equipment 43