Mac System Requirements

Before you install the software, make sure your Mac meets the following requirements:

■Mac OS X 10.3 or later (OS X 10.3.9 or 10.4.5 or later recommended)

■AirPort (802.11b) or AirPort Extreme (802.11g) wireless network interface to use EMP NS Connection wirelessly

■Power Macintosh® series G3 900 MHz or more, iMac,® PowerBook,® or iBook®

■At least 256MB of RAM

■At least 128MB of free hard disk space

■XGA (1024 ⋅ 768) or better display adapter and monitor, 16-bit color or higher

Installing the Software on a Windows System

Follow these steps:

1.Insert the EasyMP CD-ROM in your computer’s CD-ROM or DVD drive.

2.Click Install, then follow the on-screen instructions to install your projector software.

3.When you see the Virtual Display screen, check each display you want to use. These correspond to the projectors you plan to connect to the computer.

After you install the software, you can change your Virtual Display selection by accessing EPSON Projector from the Start menu and selecting Add-Remove EPSON Virtual Display.

172Software Installation