2.Enter the IP address or the projector name for the projector you want to connect to, and click OK.
The Projector is added to the EMP NS Connection screen.
If the search fails to find a projector with the specified IP address, the searching icon turns into a question mark. If this happens, run EasyMP on your projector (see page 48) to check the projector’s IP address, then repeat this step.
3.Click the projector you want to connect to and click the Connect button. If more than one projector is listed, you can select additional projectors and connect to them at the same time.
4.If you are prompted for a keyword, enter the
The computer’s image is transmitted to the projector and appears on the screen. See page 75 for details about using the floating control bar on your computer desktop.
Enabling Network Security
The projector includes the following network security options which you can enable for network projection:
■Data encryption
Encode and transmit data. Even if data is intercepted, it cannot be deciphered. See page 79 to enable encryption.
■Connection limitation (Authentication)
A user’s name and a password are registered in advance, which means that only the registered wireless port can connect to the network and prevents unauthorized third parties from connecting to the network.
78Presenting Through a Wireless Network