Status lights (continued)
Light | Status | Description |
|
|
|
| Flashing red | There is a problem with the fan or temperature sensor. Stop using the |
|
| projector, disconnect the power cable, and contact Epson as described |
|
| on page 168. |
|
|
|
| Flashing orange | Rapid cooling is in progress. Although this is not an abnormal condition, |
|
| projection will stop automatically if the temperature rises higher. Make |
|
| sure there is plenty of space around and under the projector for |
|
| ventilation, and that the air filters and vents are clear. |
|
|
|
| Red | The projector is overheating, which turns the lamp off automatically. |
|
| Wait until the cooling fan stops, then unplug the power cord. Plug the |
|
| power cord back in and press the P Power button. Make sure the room |
|
| temperature is not above 95 °F (35 °C), and there is plenty of space |
|
| around and under the projector for ventilation. |
|
| The air filters may be clogged. Clean or replace them as described on |
|
| |
|
| If the projector continues to overheat after you clean the air filter, the |
|
| problem may be caused by damage to the cooling fan or temperature |
|
| sensor. Contact Epson for help as described on page 168. |
|
| Warning: Except as specifically explained in this User’s Guide, do not |
|
| attempt to service this product yourself. |
|
|
|
| Flashing orange | It’s time to replace the lamp. See page 148 for instructions. If you |
|
| continue to use the lamp after the replacement warning, there is an |
|
| increased possibility that the lamp may break. |
|
|
|
| Flashing red | The lamp may be burnt out. First make sure the lamp cover is securely |
|
| installed. If that’s not the problem, let the lamp cool, remove the lamp, |
|
| and replace it as described on page 148. If this does not resolve the |
|
| problem, contact Epson as described on page 168. |
|
|
|
| Flashing red | Power is cut off because of an internal problem. Unplug the power cord |
|
| and contact Epson for help, as described on page 168. |
|
|
|
156Solving Problems