Projecting Over a Network

Once you’ve started EasyMP and set up your projector and computer in either Ad Hoc (Quick) mode or Access Point (Advanced) mode, or in the optional wired LAN mode, as described on page 89, follow these steps to start NS Connection and project over the network.

1.Make sure you’ve set up your projector (see page 48).

2.Windows: Select EMP NS Connection from the Start menu.

Mac OS X: Double-click the EMP NS Connection icon in your Applications folder.

3.The first time you start NS Connection, you see this dialog box. Choose a connection mode and click OK.

4.If you see a message asking you to disable the firewall, click Yes to make an exception for the projector and allow projection.

note

If you don’t see your network adapter’s IP address, allow a minute for it to appear. If your access point or AirPort base station uses DHCP (Distribute IP addresses setting is enabled for AirPort), sometimes it takes a minute for the server to pick up the IP address.

Once you’ve selected the IP address for your network adapter, you won’t see the Switch network dialog box when you start

NS Connection. If you want to change to a different network adapter, click Extension on the EMP NS Connection dialog box, then click Switch LAN on the extension dialog box.

Presenting Through a Wireless Network 73