note
Make sure your camera shows up on your desktop as a drive letter. If it does, it is probably a USB mounted device and will work with the projector software. The EasyMP software does not support
9.Position the cursor on the image file you want to project and press
Enter.
10.Select View Image. The image is projected on the screen. If you want, you can press a side of the 
pointer button to rotate the image while you’re viewing it.
To stop viewing images, press the Esc button on the remote control, then select Exit and press Enter.
Presenting Image Files From an External Drive
This section explains how to project individual image or movie files from an external hard drive or flash memory drive using EasyMP and a USB connection.
Follow these steps:
1.Connect your external hard drive or flash memory drive (see page 44).
2.Plug in your external hard drive.
3.Turn on the projector and the remote control, if they’re not already on.
4.Select EasyMP as the source by pressing the EasyMP button on the remote control.
5.Use the 
pointer button on the remote control to position the cursor on the folder where your photos or movies are stored and press Enter.
6.Select Open Folder. You see your image files when the folder opens.
7.Position the cursor on the image file you want to project and press
Enter.
8.Select View Image. The image is projected on the screen. If you want, you can press a side of the 
pointer button to rotate the image while you’re viewing it.
98Presenting from a Digital Camera or External Drive