Connecting the Mouse Cable

To use the remote control as a wireless mouse, you need to connect a mouse cable: either the round PS/2 or the flat USB mouse cable.

1.Connect one end of the appropriate mouse cable to the PS/2

Mouse/Com port or the USB Mouse port on the projector.

note

See page 34 for instructions on using the remote control as a wireless mouse.

You can use the USB port for a mouse only on systems configured originally with Windows 98, Me, 2000, or XP. If you upgraded your system from Windows 3.1 or 95, the USB port may not work as a mouse port.

2.Connect the other end to the mouse port on your computer.

3.Tighten the screws on the connectors.

If you don’t need to make any other connections, you can plug in and turn on your equipment; see page 23 for instructions.

Connecting the Audio Cable

If you’ll be using audio through your projector’s speakers, you need to connect a stereo, mini-jack audio cable (not included).

1.Connect one end of the audio cable to the Audio In port on the projector.

note

If you need additional volume (in a large auditorium, for example), you can also connect external speakers or a public address system; see page 21 for instructions.

2.Connect the other end of the audio cable to the speaker or audio out port on the computer’s sound card. If you don’t need to make any other connections, you can plug in and turn on your equipment; see page 23 for instructions.

Setting Up the Projector 13