3.Once the image is positioned where you want it, release the levers to lock the feet into position.

4.To fine-tune the height, rotate the feet clockwise to raise the projector and counterclockwise to lower it.

note

If the image shape is not square after adjusting its position, see the next section for a solution.

counterclockwise to lower it

clockwise to raise it

Adjusting the Image Shape

If the projected image isn’t square or has a “keystone” shape, do one or more of the following:

■If your image looks like or , you’ve placed the projector off to one side of the screen, at an angle. Move it directly

in front of the center of the screen, facing the screen squarely.

■If your image looks like or , press the + or — side of the Keystone button to correct the shape of the image. The

Keystone button corrects up to a 15° tilt. After correction, your image will be slightly smaller.

Keystone button

You can also perform electronic keystone correction using the projector’s Setting menu. See page 44 for instructions.

note

If the image is noticeably uneven after keystone correction, reduce the Sharpness setting using the Video menu; see page 41 for instructions.

Using the Projector 31