Adjusting Your Image

Once you see your image, you’ll need to make certain adjustments:
■To focus your image, see below.
■To resize or zoom into your image, see below.
■To raise or lower the image, see page 30.
■If the image isn’t square, see page 31.
■If the projected image is flickering or “noisy,” see page 32.

Focusing Your Image

Rotate the focus ring to sharpen the image.

focus ring

Adjusting the Image

Size

You can adjust your image size using the Wide/Tele button on the projector or zoom into a portion of the image using the E-Zoombutton on the remote control.

Using the Wide/Tele Button

To enlarge or reduce your image size in small increments, use the Wide/Tele button on the projector. Press the T side of the button to reduce the image size, or the W side of the Wide/Tele button to enlarge the image to full size.

Wide/Tele button

Enlarge

W T

Reduce

W T

note

If the image from your computer is still out of focus, you can increase the clarity by pressing the Auto button on the remote control. This optimizes the projector’s tracking, sync, and position settings. (You can also adjust these settings using the projector menus; see Chapter 3.)

note

You can always move the projector closer to or farther from the screen to adjust the image size.

Using the Projector 29