Zoom in or out

Adjust position

of zoomed portion

Using the E-Zoom Button

If you want to zoom in on a portion of the image, use the E-Zoomand Enter buttons on the remote control. Press the + side of the E-Zoombutton to zoom into your image in small increments. Press the – side to zoom out.

To position the zoomed image on the screen, press the top, bottom, left, or right side of the Enter button on the remote control. (Press Esc to return your image to its original size and turn off E-Zoom.)

E-Zoom button

Enter button

 

top

+

 

Zoom in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

left

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

right

–Zoom out

bottom

caution

To avoid damaging the lens, do not lift the projector by the lens.

Adjusting the Image Height

If your image is too low, you can raise it by extending the projector’s feet.

1.Stand behind the projector. Pull up the blue foot release levers and lift the front of the projector. This unlocks the feet.

2. Raise or lower the front of the projector as necessary.

30Using the Projector