Checking the Projector’s Lights
If your projector isn’t working correctly, first turn it off, wait for it to cool, and unplug it. Then plug the power cord back in and turn on the projector. If this doesn’t solve the problem, check the lights on top of the projector. They alert you to problems with projector operations.
Power light
Error light
warning
Except as specifically explained in this User’s Guide, do not attempt to service this product yourself.
Light | Status | Description and action |
|
| off | The projector is unplugged. Press the | Power button to turn off the |
|
| projector, check that the power cable is connected securely at both ends, | |
|
| then press the Power button again to turn on the projector. | |
|
|
| |
| orange | The projector is in sleep mode. You can unplug it to disconnect the power or | |
|
| press the Power button to turn on the projector lamp. | |
|
|
| |
| flashing | The projector is warming up. Wait for the image to appear. | |
| green |
|
|
|
|
|
|
| green | The projector is operating normally. |
|
|
|
| |
| flashing | The projector lamp is off and the projector is cooling down. Wait until the | |
| orange | light stops flashing and then press the | Power button to turn on the |
|
| projector. (You can’t turn the projector on or unplug it when the light is | |
|
| flashing orange.) |
|
|
|
| |
| flashing red | The lamp cover is not closed securely or the lamp has burned out. Secure the | |
| at | lamp cover or replace the lamp; see page 50 for instructions. | |
| intervals |
|
|
|
|
| |
| red | The projector is too hot. Turn it off and let it cool before using it. Also make | |
|
| sure nothing is blocking the projector’s air intake vent. If it continues to | |
|
| overheat, clean the air intake vent; see page 49 for instructions. | |
|
|
| |
| flashing | The projector lamp has turned off automatically because the projector has | |
| orange | overheated. Let it cool for a few minutes, then turn it back on. Also make | |
|
| sure nothing is blocking the projector’s air intake vent. If it continues to | |
|
| overheat, clean the air intake vent; see page 49 for instructions. | |
|
|
| |
| flashing red | There is an internal problem with the projector. Unplug it from the electrical | |
| at | outlet and contact EPSON for help. |
|
| intervals |
|
|
|
|
|
|
Solving Problems 55