Video menu
Menu item | Description |
|
|
Sharpness | Adjusts the sharpness of the image. (If keystone correction adversely affects the |
| image, decrease the Sharpness setting.) Press the right or left side of the Enter button |
| to adjust the setting and see the results. |
|
|
Gamma | Adjusts the vividness of image colors. |
| Choose Dynamic for distinctly contrasted images, such as charts. |
| Choose Normal to select medium contrast. |
| Choose Natural to weaken contrast for more naturally colored images, such as |
| photographs. |
|
|
Input Signal* | Selects the input signal of your computer or component video equipment. |
| Choose RGB for computer images. |
| Choose YUV for component video images. |
| Choose YCbCr for DVD images. |
| Choose YPbPr for HDTV images. |
|
|
Auto Setup* | Set to ON to have the projector automatically optimize the computer image for |
| projection. |
|
|
Mode** | Selects the video image signal mode: Automatic or Manual. (For PAL 60 Hz mode, |
| set to Manual.) |
|
|
Aspect | Selects the aspect ratio for YCbCr or YPbPr component video images. |
Ratio*** |
|
|
|
Reset | Returns all Video menu settings to their factory defaults. |
|
|
*Available only when Computer is selected as the input source.
**Available only when Video is selected as the input source.
***Available only when you’re projecting component video images.