The table below describes these functions and how to use them.

Note: Once you have pressed an Effects button, you can size and position the effect using either your mouse or your remote control (if you’ve set up the remote control to function as a mouse).

Function

Description and usage

 

 

Line

Draws a straight line on the screen.

 

Press the Effects button assigned to this effect. Then press the bottom multi-purpose

 

button once to define the line start position. Move the cursor using the remote pointer

 

button. Then press the bottom multi-purpose button again to define the line end

 

position. To draw another line, move the cursor away from the line you just created

 

and press the bottom multi-purpose button again to define the new line start position.

Ellipse

Draws an ellipse (oval) on the screen.

 

Press the Effects button assigned to this effect. Then press the bottom multi-purpose

 

button once to define the start position of the ellipse. Move the cursor using the

 

remote pointer button. Then press the bottom multi-purpose button again to define the

 

end position of the ellipse. To draw another ellipse, move the cursor away from the

 

one you just created and press the bottom multi-purpose button again to define the

 

start position for the new ellipse.

Box

Draws a box on the screen.

 

Press the Effects button assigned to this effect. Then press the bottom multi-purpose

 

button once to define the position of one corner of the box. Move the cursor using the

 

remote pointer button. Then press the bottom multi-purpose button again to define the

 

position of the opposite corner of the box. To draw another box, move the cursor away

 

from the one you just created and press the bottom multi-purpose button again to

 

define the start position for the new box.

 

 

94

4 • Using the ELP Link III Software